Recent content by Chevyloonatik

This is it after sitting outside a few days, i see the motor has come slightly out of alignment My camera lens is broken on my phone hence crappy pictures ---------- Post added at 10:26 PM ---------- Previous post was at 10:16 PM ---------- Now if i flip the driven and driver over what do i...

Heres a pic i hope of the motor and clutches installed. If this works ill get a better pic and load it

Sorry typo on the belt number, its 203785. Center to center distance of 8 3/16 for the shafts. I cant figure out how to load pics of it. I am using the cheaper belts and not the true comet belts as those are super expensive here and i dont want to risk blowing one of those as quick as these get...

I have the direction of the driven going the correct rotation for the red spring. Learned the hard way the first time i got it going. My top speed is about 40 kmh before the brlt starts to go crappy, it is a chinese ebay 40 series that is brand new

Thanks for the response, yes its a 420 15hp motor, im in canada and the 420 is either a 13 or 15 depending on what you buy, the 15 is a bit more at the till. I had a 26 in place of the 20 on the jack shaft and it was so slow i could have ran faster. The machine originally had a 6hp with tav2 on...

So ive got a carter brothers mini monster, ive got a 15hp 420cc motor with a 40 series clutch. 703985 belt, red spring in the driven 7 inch, 14 tooth #40 sprocket to a 20 tooth jack shaft then 12 tooth out to 54 tooth at wheel, tire size is 22 inch. Im 190 lbs and the cart is probably around...

Hey newbie here built real cars but new to karts. I have a mini monster truck that im driving