Recent content by charlesnj6

  1. C

    need some advice on valve timing

    Andercart-T he problem was the throttle cable somehow got messed up in the carb. When i took the two bolts out to remove it I decided to leave the cable attached and just bend it up and used duct tape to hold in in place for later reinstalation. Well somehow that plunger gizmo in the bore must...
  2. C

    need some advice on valve timing

    That's what is was, it is now running like normal, everything is good. I want to thank all you guys for your help as it would not be in operation without it. My grandson is very happy and so am i. I would like to wish everyonr a MERRY CHRISTMAS AND A HAPPY NEW YEAR!!!
  3. C

    need some advice on valve timing

    ok and thanks again, i hope your getting my replys, i don't see them posted. Not to good at using these threads , don't understand all the directions.
  4. C

    need some advice on valve timing

    OK I will check it out and thanks again for your help.
  5. C

    need some advice on valve timing

    I took the throttle cable off the carb., don't see anything wrong, any ideas why the engine would run at full throttle?
  6. C

    need some advice on valve timing

    Hey guys i'am making progress. After my grandson got home from school today i tried another idea and that was to get it to turn over faster so i put a car battery charger on and turned it to engine start and it started up and ran full throttle. At least i know it will run, now i just have find...
  7. C

    need some advice on valve timing

    Thanks guys, I checked the valve timing both ways with TYLER and ANDERCART'S method. I was surprised to find the valve timing was right on the money ( hard to beleive) it started and ran at idle speed for about 7 or 8 seconds and quit. I have spark, gas and compression but won't start or fire at...
  8. C

    need some advice on valve timing

    I will give that a try. THANKS SO MUCH, THANKS TO EVERYBODY. I will let you all know how i make out.
  9. C

    need some advice on valve timing

    Kaption Krunch- it is electric start and it turns over like eeerrrrunhhh eeeerrrunhhh, sort of like a car engine that the dist. is to far advanced, I have to be very carfull the valves don't hit the piston so far that has'nt happened, it has real good compression when i put my finger on the...
  10. C

    need some advice on valve timing

    It probaly is the same manufacturer.
  11. C

    need some advice on valve timing

    yes that's basicaly it. That's a great find!!!!
  12. C

    need some advice on valve timing

    Rotore, thanks for the reply, just tried to start it and it wont start, it gonna big tough because i dont know what direction to go on tooth at a time.
  13. C

    need some advice on valve timing

    my grandson has a rocketa go cart 110 cc three speed forward and reverse, well the problem was he forgot to keep a check on the oil level and it got a little bit to low and the wrist pin got stuck due to a lack of lubrication. I found that out after it quit running and would not turn over so i...
See more
Top