Recent content by busted_blocks

My day job is product development. I started as a mechanical engineer but spent a lot of time doing digital electronics. This motor control stuff is new for me, but not PCB layout and what not.

Next installment about blowing up electronic parts is up! This week I blew up my control board, fixed and ended making some progress. You can check it out on YouTube

That's a good point. It's good for testing as the engine is easier to start, but once things are working I will remove it. That's a great suggestion.

I got an engine attached to the dyno and running. The control electronics need some work though. I decided to do a video update this time. You can check it out on YouTube.

That's a ton of watts. I really don't know the best way to go. I wouldn't know how to build one so I'd buy it, but for that many watts it wouldn't be cheap. Good luck, sorry I can't be of more help.

Thanks, I'm 85% sure this will work. I have a few days off to work on it starting tomorrow. The only way I know how to learn stuff is try, break it and figure out why it broke :ROFLMAO: 700HP? Might be overkill for a daily driver lol. I've noticed a trend here with all the EVs on the road...

Until it works, it's just a bunch of parts sitting on a table :ROFLMAO:

So I've been working on the dyno when I can. I have the electric motor mounted with the load sensor. I figured out the internal temperature sensors in the motor are PT1000 as well. Unfortunately the rpm/position sensor in the motor is a resolver which is too complicated to implement just to get...

I'd suggest buying one and it depends on the total power you need. What are you running?

I got a chance to test the control method today with a smaller electric motor. Worked great. With a PWM signal to the mosfets I can control the resistance (braking force) and it's very smooth. Next step is to finish the mechanical assembly. Once that's done I'll work on the electronics. I...

I did a bunch of research into home built dyno's. There are a lot of options and the simplest is probably something based on a motorcycle brake. For me though, I want something that can run continuously at 10kW or there abouts. I started playing with some numbers and a hydraulic based system...

The brake dyno is quick for sure. My idea is to not just have a dyno but a setup that can load an engine for extended periods for break in and simulation of some track conditions. I'm aiming for $500 budget, but things add up quick. Here it's often easier to just buy parts than hack them...

Just a quick update. Things at the track got a bit complicated. Business wasn't good and my mechanic friend changed jobs. Tuning at the track alone is less fun and the pricing is such that if I do a few test laps I have to pay the $25 fee. I was letting the mechanic do the testing until things...

That is a prety sweet engine. I saw he replaced the crank shaft. the one he took out had a hole for oil in the crank under the connecting rod. That does look like a good way to get oil to the connecting rod

I think you mentioned that in one of the early messages. That was part of the inspiration for trying to add the shells. It also give me pretty good hope that it will work. :)