Recent content by al "off road"

Clutch side Here is the clutch side of the motor

I have a rotax 377 twin cylinder motor for Sale with both the driver and driven clutch. It isn't secured to a mount (to test fire) but it does Pull through and does seem to have compression. Got it on trade (along With the kart I wanted) but don't plan to Use it. Asking $200 OBO located near...

Well 2 out of 3 isn't too bad. (Time and patience..) Most of these projects have parts from the scrap bin. Like to see what I can do on the cheap. I will post a finished pic Thanks again

Thanks..Not my first retrofit job. One washer a spacer Makes but anything past that will be turned Out on the lathe. Mechanical engineer BTW

Retrofit sprocket Ah hah. Something like this.. Just need to fab up some spacers to Locate the drum to the band and the sprocket To the clutch.. Thanks for the help..

Drum side of pulley And the drum side.

Hub interface surface Here is the mounting surface of the pulley / brake assy. Since the pulley was broken, I have already turned the damaged part off the hub and plan to use a blank Sprocket (not to exceed 9") drilled to match the existing drum Bolt pattern with spacers to align it to the...

Fun karts sprocket and belt Here is a quick shot of the sprocket area. After searching for the sprocket, the gokart type and the manufacturer to no avail, I figured that I was on my own for a fix. Just thought I would check here ..

Came across a "Fun Karts" nascar bodied parade kart. It has/ had a belt drive system using a centrifugal clutch on the motor and a cogged sheeve/pully on the tire. While it is mostly complete, its missing the belt and the pulley is cracked missing chunks. Where can I find replacements...