Predator 212 - torque converter mount plate- bolt thread size?

[chimmike]

Got an ebay 30-series. Came with hardware but of course the thread size is wrong. Even tried removing a bolt from the 212's cover itself and that wasn't correct for the threads? Did my 212 get tapped weirdly? Anyone know the bolt thread size on this thing?

Wild.

I know the shaft bolt is 5/16x24 and 2" long...need to source that one.

 

[chimmike]

Anybody?
I don't have a thread tap kit I can use to chase the threads or figure out thread size. Last thing I wanna do is go to the store and buy 4 different thread sizes

 

[landuse]

Predator crank shaft bolt error?

I know that there is a thread on here saying the bolt size for a 212 predator is 5/16-24 but I’ve went to Home Depot and got a bolt and then I’ve gotten 2 different ones from other hardware stores and they simply will not fit. They thread in a tiny bit then get stuck. The closest I’ve found to a...

www.diygokarts.com

Hope this helps

 

[chimmike]

Predator crank shaft bolt error?

I know that there is a thread on here saying the bolt size for a 212 predator is 5/16-24 but I’ve went to Home Depot and got a bolt and then I’ve gotten 2 different ones from other hardware stores and they simply will not fit. They thread in a tiny bit then get stuck. The closest I’ve found to a...

www.diygokarts.com

Hope this helps

So, it's not even the crank bolts I'm talking about, it's the bolts to attach the TC to the predator block.

 

[chimmike]

Thread size is the same as the crank bolt: 5/16x24.
Pure luck today.