predator 212 build advice

[fastsr20det]

ok guys so i just ordered the ARC billet flywheel, ARC billet rod, Billet Lifters, billet push rods, and dyno cam billet MOD 1 cam pretty much everything to get the block closed up.... so i didnt notice this intill after the fact, that Cam needs an ignition timing of 34 deg BTDC and the flywheel has already a 32 deg advanced timing on it would this require me to buy a 4 degree timing key to get the extra 2 degrees that cam needs? you can click on this to view the specs on the cam that i ordered https://www.ombwarehouse.com/MOD1-Grind-Tool-Steel-Billet-Clone-Core-Cam.html?category_id=1641 thanks again guys and gals your a big help with this project

 

[Jason1213]

Have you broken your engine in yet? Great build, keep up the good work

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[fastsr20det]

Have you broken your engine in yet? Great build, keep up the good work

Sent from my SAMSUNG-SM-G900A using Tapatalk

No not yet its still brand new im going to break it in with all the stuff in there .

 

[Jason1213]

Ohh alright

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[fastsr20det]

Ok i just finnished ordering everything i need to finnish building the motor. Next thing is going to be a clutch. My price range is 0-200$. Was looking at the bully clutches but they are just too much but i really want the cheetah clutch by noram. i dont mind paying the extra 19 bucks out of 200 for it. Is this clutch any good? Have any of you guys used it? Unless you guys have another clutch in mind mind let me know i will posts pics when everything arives should be here by the end of the week.

 

[fastsr20det]

Or i can get one of these please let me know its about the same as the cheetah i wouldnt mind haveing a manual clutch http://3dmotorsport.net/collections...ts/copy-of-3d-manual-clutch-kit-for-mini-bike

 

[outcrydrummer]

Is it a kart or a mini bike. I thought the arc flywheel for predator was 34 degrees advanced already......not 30.
??
For a minibike the 3d is worth a shot

 

[fastsr20det]

Is it a kart or a mini bike. I thought the arc flywheel for predator was 34 degrees advanced already......not 30.
??
For a minibike the 3d is worth a shot

no its advanced 32 degrees I had to order a 2 degree key for it cause that's what the cam I ordered requires...all the parts should be here tomorrow ....its a kart...so should I go with the cheetah I'm trying to stay around that price range have you herd anything good or bad about this clutch? or do you have any other suggestions I'm stuck between those two I figured having a manual clutch would have been pretty cool but yall are the experts lol I just take on some of the help and advice from yall and blow my money lol. But I'm also trying to stay in a budget with out the wife nagging too much lol im about 900 bucks in just with the motor and that's including the predator.

 

[fastsr20det]

So I finally Finnish getting all my parts today its a good way to spend over 650 bucks lol here's what I got:
*new side cover gasket
*AR3910X Racing Spark Plug
*.010" Predator 212 Head Gasket
*Billet Lash Caps
*burris racing Stud Kit
*CM Push Rods
*2 Degree Offset Key
*Valve Retainer Kit w / keeper for 36lb Spring
*Predator Hemi Valve Cover Gasket
*MOD1 Grind, Tool Steel Billet Clone Core Cam
*36lb Valve Spring for BSP, Clone, GX200, Predator 212
*billet fly wheel
*Carburetor, Tillotson, 304, Gas
*billet lifters
*Rod, Connecting, Billet
*Valve, 25mm x 5.5, Stainless
*Valve, 28mm x 5.5, Stainless
*Guide Plate, Billet


its a lot and I still have more stuff to order I made a rookie mistake to so I didn't do to much research on the carb and found out that I needed a intake manifold for it so still need that the air filter adaptor and a few more thing including clutch and exhaust....wife is going to kill me lol...o well take a good advice from me its always easier to apologize than to ask permission hahaha...but this thing hopfully is going to be a beast when is done hopefully a few more weeks. and I originally started with the stage 1 kit from OMB and I talked to them about returning it and they where really cool about me doing it cause pretty much that kit is useless to me now. they will just give me like 100 bucks credit towards my next order so that's not to bad. I will keep posting in the next few days as the build goes on.

 

[fastsr20det]

and I still need advice about the clutch to let me know what u guys suggest its between the cheetah by noram or 3d manual clutch..