comet tav2 "dinging" noise at idle

Status
Not open for further replies.

PredatorPowaaa!!

Mistake Maker
Messages
103
Reaction score
0
Location
Ontario,Canada
so, i have a comet tav2 that is only like a year old. i have been pretty mean to it when i was running the wrong gear ratio (that i have now corrected) but there is no rust, no wear on the inside of each pully (all the surfaces where the belt rides are completely smooth) and as long as i can remember, when the engine is at idle (kart is not moving) there is a ding sound coming from the drive clutch. (ding ding ding ding ding ding......) it never stops, and the dinging stops once the clutch grips the belt. i have disassembled the drive and i give it maintanece all the time. there was nothing wrong inside the clutch and it still pulls like an SOB like it always has. the dinging is just extremely annoying and ruins the wonderful sound of the straight-piped predator 212. the noise is not super loud, its just a constant dinging.:huh::furious2:

---------- Post added at 05:28 PM ---------- Previous post was at 05:18 PM ----------

 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
It's just the cover on the driver.
You can take the driver cover off, and using a punch and hammer, with the cover laying front down on something solid, just short of an anvil, And work around the edge of the mounting hole.
Doing just a little at a time, until the cover fits tight again.
 

PredatorPowaaa!!

Mistake Maker
Messages
103
Reaction score
0
Location
Ontario,Canada
yeah so i tried the punch and hammer, and now the splined hub fits snug into the front cover, but the dinging noise is still there.

---------- Post added at 07:02 PM ---------- Previous post was at 07:01 PM ----------

lol i forgot the quote
It's just the cover on the driver.
You can take the driver cover off, and using a punch and hammer, with the cover laying front down on something solid, just short of an anvil, And work around the edge of the mounting hole.
Doing just a little at a time, until the cover fits tight again.
 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
yeah so i tried the punch and hammer, and now the splined hub fits snug into the front cover, but the dinging noise is still there.
You're gonna have to live with some of it.
Mine is nice and snug,but it still dings a bit.My wife's is brand new, probably has 2 miles on it,and there's some dinging.

The absolute best way to stop the dinging, is to place a pot over your head and bang it with a spoon while you ride.
 

Hellion

Staff Murderator
Messages
9,444
Reaction score
4,372
This dinging is so intrusive that it is heard over the roar on an unmuffled engine?

Wow. You've got good ears. Wear earplugs and stay away from tunes played through headphones or earbuds...
 

PredatorPowaaa!!

Mistake Maker
Messages
103
Reaction score
0
Location
Ontario,Canada
ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding-ding-aling-a-ding:censored::mad::mad::mad2::mad2::furious2: :horse: :horse: :horse: :horse: :horse: :horse:
 

Whitetrashrocker

Inmate #952016
Messages
5,238
Reaction score
4,739
Location
Southern New Mexico
Take the sissy cover off. No more ding a lings.

---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------

Oh I see it's the actual clutch not the idiot shield.

That would drive me nuts too.
 

PredatorPowaaa!!

Mistake Maker
Messages
103
Reaction score
0
Location
Ontario,Canada
yeah, but also no more torque converter. i mean the metal side cover on the drive clutch, not the plastic cover, that thing is dumb.

---------- Post added at 09:59 AM ---------- Previous post was at 09:57 AM ----------

it does drive me nuts. i can hear it over a stright piped predator 212.

---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------

the idiot shield is also a heat magnet. (it stops airflow going to the TC) i never even bothered putting mine on.
 
Status
Not open for further replies.
Top