How thick does my frame need to be?

[silveravnt]

Using 1.25" or 1.5" square tubing is .065" thickness enough?

160cc quad engine
front suspension from the quad

 

[Joe-405]

Yay another okie finally !


And thickness will vary depending on how big you want the kart and how much bracing your gonna add and what your gonna do with it.

 

[silveravnt]

Yay another okie finally !

HA! Deja vu!

I live in Tuttle and work in south OKC.

 

[kamden5689]

I live and work in Clinton! finally someone else from OKlahoma

 

[Poboy kartman]

See...just to clarify: Ummmm...Joe 405 has been around awhile....and a new member comes in and says "Finally, another Oklahoman! "

There's a reason Oklahoma beer is limited to 1/2 alcohol content than Texas.....

 

[Joe-405]

See...just to clarify: Ummmm...Joe 405 has been around awhile....and a new member comes in and says "Finally, another Oklahoman! "

There's a reason Oklahoma beer is limited to 1/2 alcohol content than Texas.....

There is also reason y'all are hanging from our .............

 

[Poboy kartman]

Ahhhh....we ripped them off years ago...It's how bad you suck that keeps us from sinking in the Gulf.

But come on down for the next Texas/ OU game so you can witness humiliation in person!

 

[Hellion]

See...just to clarify: Ummmm...Joe 405 has been around awhile....and a new member comes in and says "Finally, another Oklahoman! "

Who's new? Silveravnt has been a member longer that you, he just apparently has a life and hasn't racked up a 10K+ post count.

 

[chancer]

Who's new? Silveravnt has been a member longer that you, he just apparently has a life and hasn't racked up a 10K+ post count.

Both y'all (Poboy and Hellion) are wrong.
Anybody click the blue words.
Its an old inside joke. Leave the Okies, This aint the Grapes of Wrath!

 

[Denny]

Using 1.25" or 1.5" square tubing is .065" thickness enough?

160cc quad engine
front suspension from the quad

How many licks to the center of a Tootsie Roll Tootsie Pop?

Denny

 

[chancer]

How many licks to the center of a Tootsie Roll Tootsie Pop?

Denny

3...
and that is Trivia even Sid does not know!!!

 

[Denny]

I thought "The world may never know.".

Denny

 

[Poboy kartman]

Who's new? Silveravnt has been a member longer that you, he just apparently has a life and hasn't racked up a 10K+ post count.

See...you missed the joke completely! It was Joe-405 saying "Finally! Another Okie!" to someone who had been a member longer!

 

[Hellion]

I was poking at you, mister. I just thought you were being your usual, stupid self.

 

[silveravnt]

I live and work in Clinton! finally someone else from OKlahoma

Right on! I was in Clinton once last year for a funeral. It's my kind of town.

---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------

How many licks to the center of a Tootsie Roll Tootsie Pop?

Denny

Ha! I hear you. I bought .083" (14ga) 1.25" square tubing. Pray I don't pass out working on this tomorrow in the heat.

 

[Denny]

Right on! I was in Clinton once last year for a funeral. It's my kind of town.

---------- Post added at 03:14 PM ---------- Previous post was at 03:11 PM ----------



Ha! I hear you. I bought .083" (14ga) 1.25" square tubing. Pray I don't pass out working on this tomorrow in the heat.

My Mom, sister, niece and brother-in law all live in Tulsa. You'll be fine in the heat, It's a dry heat.

Denny

 

[silveravnt]

You'll be fine in the heat, It's a dry heat.

HA! yeah right. 83% humidity right now at 7:45 am