Need Tecumseh Gouvenour Info

[outsider347]

I need to re assemble the gouvenour spring/linkage. The PO made a mess of it all, and I need to start from scratch. Info as follows

OHH 60 71131C

If I could find a clear drawing , I'd appreciate it

I looked at Jacks site, but the dwgs were not clear

Tks for your help
Ed

 

[soggycrashed]

I never hooked up the idle spring. Then you just need a hook for the governor arm to carb.

 

[outsider347]

I never hooked up the idle spring. Then you just need a hook for the governor arm to carb.

Thanks for taking the time to respond Benny, but mine is a different configuration.
ed

 

[soggycrashed]

Thanks for taking the time to respond Benny, but mine is a different configuration.
ed

Post some pictures of your engine.

 

[outsider347]

 

[Poboy kartman]

Your engine should be set-up like Benny showed , everything is the same on yours as mine....Exactly ...you are just missing the parts...

 

[soggycrashed]

Your engine should be set-up like Benny showed , everything is the same on yours as mine....Exactly ...you are just missing the parts...

It looks like he's missing the governor spring, and the components for the throttle cable hookup.

 

[outsider347]

would you have a pic of the correct governor spring?
tks
ed