Opinions on Generac Engines?

Status
Not open for further replies.

duane1969

New member
Messages
10
Reaction score
0
Location
Ronceverte, WV
I am thinking of buying a Generac engine to start our project, but don't see much about them being used for karting. Anybody have any experience with them. Will they hold up for karting?
 

OzFab

Well-known member
Messages
15,615
Reaction score
74
Location
Warwick Qld, Australia
Most generator engines have a tapered output shaft.

... and...?

I think he means generic as in a clone.

Lots of guys on here use the Harbor Freight Predator engines & swear by them.

That being said, IIRC, you have a non working engine with your kart & you're a mechanic; why not try to fix the engine you have first?
 

smgs92

New member
Messages
257
Reaction score
0
The Harbor Freight Predators are great engines I have two.
One of them is a 212cc that has been built to around 12hp that is originally a 7hp.
The other is a 420cc gx390 clone that is 16hp.

If you do enough research I got my 420cc used but in great condition from some warehouse for $140 they're $300 new.
 

landuse

Moderator
Staff member
Messages
18,803
Reaction score
611
Location
Pietermaritzburg, South Africa
... and...?

I think he means generic as in a clone.

Lots of guys on here use the Harbor Freight Predator engines & swear by them.

That being said, IIRC, you have a non working engine with your kart & you're a mechanic; why not try to fix the engine you have first?

The Harbor Freight Predators are great engines I have two.
One of them is a 212cc that has been built to around 12hp that is originally a 7hp.
The other is a 420cc gx390 clone that is 16hp.

If you do enough research I got my 420cc used but in great condition from some warehouse for $140 they're $300 new.

Sorry guys, but the OP does actually mean generator engines. Generac is a brand of generator engines

http://www.generac.com/

Usually generator shafts are tapered like crazyman said
 

duane1969

New member
Messages
10
Reaction score
0
Location
Ronceverte, WV
Yeah Generac the brand. As a general rule generator shafts are tapered, but I have found a few Generacs that have straight keyed shafts. They tend to be more expensive that a Briggs engine, but they also tend to be higher HP too. I was looking at one on eBay that has a straight shaft and is 33HP (I have no intentions of putting a 33HP engine in a kart LOL). I was just curious if anyone had tried some of their lower HP engines for karting purposes.
 

landuse

Moderator
Staff member
Messages
18,803
Reaction score
611
Location
Pietermaritzburg, South Africa
Yeah Generac the brand. As a general rule generator shafts are tapered, but I have found a few Generacs that have straight keyed shafts. They tend to be more expensive that a Briggs engine, but they also tend to be higher HP too. I was looking at one on eBay that has a straight shaft and is 33HP (I have no intentions of putting a 33HP engine in a kart LOL). I was just curious if anyone had tried some of their lower HP engines for karting purposes.

I have been on this forum for a while, and I can say that I have never read of anyone even mentioning Generac engines. That is not to say that they wouldn't work. Any sort of engine will work as long as you can get a clutch on it IMO
 
Status
Not open for further replies.
Top