How to put a pull start on the electric start spiderbox?

Status
Not open for further replies.

dictionary6767

New member
Messages
249
Reaction score
0
Location
Nj
The yerf dog spider box has the electric startand the battery almost never has enough power to start it, the battery is only a couple months old and it never works, sso I just want to put a pull start on how do I do it??
 

B man

Tecumseh FTW!
Messages
2,490
Reaction score
3
Location
Oliver springs,Tn
The yerf dog spider box has the electric startand the battery almost never has enough power to start it, the battery is only a couple months old and it never works, sso I just want to put a pull start on how do I do it??

you cant. you might get away with a kick start though. but its best just to fix the electric start.
 

*ryan

New member
Messages
25
Reaction score
0
did you check to make sure your grounds are cleaned up nice and all your connections are good and tight?
 

dictionary6767

New member
Messages
249
Reaction score
0
Location
Nj
All the wires are conected and the connections are clean but the multimeter says it has 12.7 volts but the battery sounds dead?? Also how could I put a kick start on it??
 

SoapKart

New member
Messages
13
Reaction score
0
Are you using a stock battery? When I updated mine I upgraded to a lawn mower battery. I had to move the battery location to the rack but haven't had any problems. $30 for the battery and used the stock wires. Check out my photo album for pics.
 

*ryan

New member
Messages
25
Reaction score
0
a weak battery would be giving click click click when you go to start it
a dead battery would be nothing

if it sounds dead, but has voltage, sounds like our solenoid is bad
 
Status
Not open for further replies.
Top