Name This Engine

Status
Not open for further replies.

qtband

Well-known member
Messages
1,766
Reaction score
61
Location
St. Louis, MO
I was told that this was a 6.5 Blue Max. I don't know. It has been painted black, except for where the stickers were. That is where the blue shows. It has a 3/4 shaft. I am missing the air cleaner so it doesn't run correctly. This is why I need engine ID. I need parts.
Thanks!!
 

Attachments

  • eng1.jpg
    eng1.jpg
    132.2 KB · Views: 10
  • eng2.jpg
    eng2.jpg
    185.4 KB · Views: 5
  • eng3.jpg
    eng3.jpg
    158.9 KB · Views: 5
  • eng4.jpg
    eng4.jpg
    76 KB · Views: 5

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
12
Location
Cornwall, UK

Thats because they are both honda clones. However I expect his is 196cc
It only runs well when choked. Any ideas what the issue is? And where do I find parts?

Sounds like a dirty carb. I had the same issue and cleaned the main jet (located in the carburettor bowl, undo the screw to the gold colour bowl, look down the threads where the screw was. In there is a jet removable with a flat head screwdriver. Remove it and use a small wire to poke any debris out.)

You may also want to buy a spray can of carb cleaner and some new gaskets because these symptoms are also the same syptoms as a leaking carb gasket.
Hope that helps
 

qtband

Well-known member
Messages
1,766
Reaction score
61
Location
St. Louis, MO
I have cleaned out the carb. the gasket looks bad. I still need to know where to get some parts....
 
Status
Not open for further replies.
Top