element10554
New member
Ok so I am in the process of restoring an 18hp Briggs and Stratton
Model 422437
Type 0749 01
Code 87010512
I have wire wheeled the air filter and took off the rust and I have spray painted the air filter as to help it stop from rusting again. I did an oil change and put in new spark plugs.
Now I need to find a manual for this engine so I can properly take apart the carburetor and clean it and set up the electric starter. Ive tried to plug the numbers into google but have come up shorthanded. Also after The carb is cleaned and the starter is set up any recommendations on what I should do to the engine to prep it to be started for the first time in almost 2 years?
NEW QUESTION
I need wiring help. I can provide pictures if the video does not have enough detail.
http://www.youtube.com/watch?v=556FYIu9Ln4
Please bear with me I am no artist and I suck at microsoft paint. Please try and use these as a reference to the video.
Pictures
This is the rust in the intake I am talking about.
This is where the engine will end up.
Model 422437
Type 0749 01
Code 87010512
I have wire wheeled the air filter and took off the rust and I have spray painted the air filter as to help it stop from rusting again. I did an oil change and put in new spark plugs.
Now I need to find a manual for this engine so I can properly take apart the carburetor and clean it and set up the electric starter. Ive tried to plug the numbers into google but have come up shorthanded. Also after The carb is cleaned and the starter is set up any recommendations on what I should do to the engine to prep it to be started for the first time in almost 2 years?
NEW QUESTION
I need wiring help. I can provide pictures if the video does not have enough detail.
http://www.youtube.com/watch?v=556FYIu9Ln4
Please bear with me I am no artist and I suck at microsoft paint. Please try and use these as a reference to the video.
Pictures
This is the rust in the intake I am talking about.
This is where the engine will end up.
Last edited: