Latest activity

IMO the expensive high dollar firearms are all matched upper and lower receivers, machined almost perfect and carry a premium price tag...

Honda st1300 v4. Fitted the rear suspension and unfortunately I made the front lower links to long so I will have to redo them.

Dont forget to add some positive caster when you put the front spindles on. I assume you will be using a solid drive axle?

Yes, I was going to do 7 degrees of caster. I will be using a solid axle.

IMO the expensive high dollar firearms are all matched upper and lower receivers, machined almost perfect and carry a premium price tag...

The valve lapping compound is a lot quicker. Only have to cycle it a dozen times or so. My great uncle Joe taught me that trick when I...

I used toothpaste on my ruger american bolt. Watched some TV and worked it a few hundred cycles. Got rid of that zipper sound and its...

Here's the sound. Not my video. https://youtube.com/shorts/vd3IhhzrCbw?is=iRH5vo28TFhsZLc8

I used toothpaste on my ruger american bolt. Watched some TV and worked it a few hundred cycles. Got rid of that zipper sound and its...

Fine valve grinding compound laps in bolts nicely. Just be sure to take it apart and clean thoroughly.

During. The housing connect point in the rack sheathing is now centered. Next comes aligning the rack cuts with the now centered...

I used toothpaste on my ruger american bolt. Watched some TV and worked it a few hundred cycles. Got rid of that zipper sound and its...

Fine valve grinding compound laps in bolts nicely. Just be sure to take it apart and clean thoroughly.

It’s way easier to teach little Johnny to check the gas and oil himself!

That's what I would do, but I'd find a used group to mess around with and keep the original the way it is. Sounds like the original is...