Latest activity

12 inches (approximately 305mm). Common Upgrade: Many riders switch to heavier duty or stiffer motorcycle-style rear shocks, which are...

Looks like that one is a pain to mod. It's a drop in trigger group and finicky, apparently. Unfortunately there are no aftermarket...

First timer here! Pick up a Fire Fox 620 and fitted a Pred 459cc. I'm looking at replacing the original shocks but can't find much...

First timer here! Pick up a Fire Fox 620 and fitted a Pred 459cc. I'm looking at replacing the original shocks but can't find much...

Like this.

Maybe drill a hole in the top and bottom, install a sight glass. Clear vinyl tubing is cheap and easy to install. Two hose barbs, a dab...

Any advice for the trigger on this 190? Its a hard pull. The sear is crisp and not much drop after, but its just so dang hard to pull.

I ended up polishing the bolt and inner portion of the receiver on my tube fed Marlin Model 60 and it made a big improvement on the action.

Yea, I’ll just stick with the old tube fed Marlin or my Remington. And not have to screw with a clip and reloading it. I can reload a...

Like this.

What’s the dimensions on the kart frame as it is? If it’s for flat pavement then you can get by straight-chaining it (clutch, sprocket...

No hellion he spelled it right. Locost. Look them up. A centrifugal clutch will not work for his son. He said he’s going to be riding on...

He’ll only run it out of gas or oil one time before he learns to check it on his own.

Maybe drill a hole in the top and bottom, install a sight glass. Clear vinyl tubing is cheap and easy to install. Two hose barbs, a dab...

Yea, I’ll just stick with the old tube fed Marlin or my Remington. And not have to screw with a clip and reloading it. I can reload a...