Wire brush rpm lower than grinder rpm.

[nak18]

I purchased an angle grinder the spin 110rpm @ no load, but I was going to buy a wirewheel, but the max rpm is 4,500rpm.

Does anyone else use a Wire-wheel in there angle grinder that has a rpm lower than the grinder?

EDIT - ADD:
1.Drill Master angle grinder (item number: 95578)

The wheel I was going to buy. But rpm is too low.
2.http://www.ebay.com/itm/NEW-4-1-2-x...USH-ANGLE-GRINDER-FREE-SHIPPING-/110780143017

Trying to get stuff from ebay, since I don't have Credit Card(CC) and the Visa/Mastercard gift card activation fees add up pretty fast

 

[B-Well]

I purchased an angle grinder the spin 1,110rpm @ no load, but I was going to buy a wirewheel, but the max rpm is 450rpm.

Does anyone else use a Wire-wheel in there angle grinder that has a rpm lower than the grinder?

i have a feeling you have an incorrectly placed comma.

my electric grinders turns 11k and pneumatic turns upwards of 25k

post up your tool and the brush and we can surely point you in the right direction

 

[fowler]

u need to get a wire wheel to suit the grinder

they are commom to use

dont try and put one in a die grinder

 

[r_chez_08]

Any of these ok?
http://www.harborfreight.com/catalogsearch/result?keyword=Wire+grinder

 

[Justin9]

Any of these ok?
http://www.harborfreight.com/catalogsearch/result?keyword=Wire+grinder

http://www.harborfreight.com/4-1-2-half-inch-crimped-wire-bevel-brush-96191.html

 

[Doc Sprocket]

Oh there's definitely some errors there! Any angle grinder I've ever used turns between 10, 000 and 15,000 RPM. And I have never seen a wire wheel rated for a lousy 450RPM. Most cordless drills turn faster than that in low gear.

And no- never ever use an accessory with a lower maximum speed rating than the tool. Ever.

 

[kendelrk]

the wire wheel you posted said 12,500 max rpm

 

[nak18]

It's 11,000rpm, I'll edit the main post. and add wire wheel.