which engine?

Status
Not open for further replies.

tummy_butt

New member
Messages
38
Reaction score
0
so picked up a northern tool mag from the store and was just looking at thier engines. whats your opinion on which one to get to build a mini buggy with full suspension for a 250lb driver and a 3yr old child continuing to grow?? ((hoping to keep it for her when she gets bigger))

honda 200cc gx for $379
powerhourse 414cc (claiming 18.02 ft.lbs tq) for $319(reg. $379)
briggs 240cc 1150 series (claming 11.5 ft.lbs tq) for $289
kohler command pro 208cc for $339


by no means am i limited by this store, got HF too with predator engines(and probably countless others everywhere else)

probably asking alot for a lil engine?

also tempted to build all EV buggy, just for *hits and giggles
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
For a mini buggy, I would use no less than the powerhouse 414cc from your list. Have a look at the larger predator engines too )346cc & 412cc).

In short, IMO, anything less than 10hp will not do the job efficiently
 

tummy_butt

New member
Messages
38
Reaction score
0
good to know.
do you know anything about the powerhorse? (reliabilty, mods and/or tunes to get more hp/tq?)
 

anderkart

Moderator
Messages
6,432
Reaction score
393
Location
Surprise Arizona USA
i have had one of these for a couple years now and can attest to their ability to take abuse ! plus they have GOBS of torque...which to me = FUN ! may be a little overkill for what you want ( maybe not?) but i would rather have too much power than not enough!
http://www.carrollstream.com/16HP_Gas_Engine_With_Electric_Start_p/cs190es.htm

Whoa, I cant believe they're still selling those clones painted red. Honda won a lawsuit against several chinese engine manufacturers that were building clones.

Honda only owns 3 patents on the GX-sires engines, so its no big deal to copy most all of this models design features. But Honda did win their court case as far as the clone manufacturers not being allowed to paint their counterfeits red like the genuine Honda's.

Of course regulations like this are nearly Impossible to enforce in a country like china, so... :rolleyes3:
 

tummy_butt

New member
Messages
38
Reaction score
0
so how much frame tubing would i need, and whats the best size?
i was thinking 1 1/4" or 1 1/2" but not sure what ga/thickness...
 

tummy_butt

New member
Messages
38
Reaction score
0
I'm not looking to buy plans, looking to Fab my own design while getting inspiration from another..
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
Then it would be a matter of calculating &/or estimating.

Asking us how much material you need for an unplanned build is like asking how long is a piece of string :roflol:

The answer is: as long as you need it to be :worried2:
 
Status
Not open for further replies.
Top