Valve spring on a Duromax 16hp

Status
Not open for further replies.

raposak

2012 Build-Off Winner
Messages
203
Reaction score
0
Location
Howell, NJ
I removed the governor on my new motor. In doing my research, I read to put 18lb springs on, but ordered 26lb springs by mistake. Will there be any problems installing the 26lb springs? The motor is stock except for intake and governor.

Thanks.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Cam, rockers, and push rods will wear faster. In other words...a shorter life span.
Do you know the reason for heavier springs?
They are not really needed unless you have an ultimate goal.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Chances are you will never get to that point under a load. Floating valves is actually a good thing. Its giving you a warning.
Try it in its stock configuration first, then make the changes...my 2¢.
 
Status
Not open for further replies.
Top