Tecumseh edger help!!! thanks

Status
Not open for further replies.

SixNeinSoFIne

New member
Messages
1
Reaction score
0
I have a random tecumseh edger motor that i bought. the serial is 143.631032

ive looked around and i cant tell how big it is....does anyone know how big it is?
 

slideways

New member
Messages
575
Reaction score
6
You found the serial.. what about the model on the tag?

The only think i can figure is a 143cc.. which is around 3.5-4hp range.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
The 143 indicates a Sears part designation, not cc's OR serial number. In this case the 143 is Tecumseh.
If the first 3 digits were 500, that would be Briggs & Stratton.
That's a Sears/Craftsman part number and indicates H25-25214H or 2.5hp horizontal PTO Tecumseh.
http://www.m-and-d.com/pdfs/Tecumseh/H25-25214H.pdf
http://www.partstree.com/parts/?lc=tecumseh&mn=H25-25214H&dn=1021125214H-EN
At one time this was an unbelievably common engine. Stellar mini bikes comes to mind.
Quite possibly, your particular engine may have a stubby shaft making it useless for anything other than an edger.
 
Status
Not open for further replies.
Top