tech' 2 stroke snowblower motor?

Status
Not open for further replies.

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Interesting- thanks for the info, Russ (and others).
I'm still digging. I found another manual that rates these engines from 5-6.5 hp depending on governed RPM, which is a model dependent setting...

Again, it shall continue to blow snow for now.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
im so used to 4 stroke carbs with bowls that i forgot they were 2 stroke!
My L-B's had bowl carbs to begin with. There is no difference between 4 cycle and 2 cycle carbs.
I chose the Tillotsons for a few different reasons.
As far as the B&S 2 cycle engines are concerned, I purchased 2 of them (new) from Ebay a few years ago for a really good price. Truth is...they suck. They are now just gathering dust...as is the clone.
If you are going to go to the trouble of mounting something unusual...go to the Duraforce L-B. You'll never look at a clone again.
 

The Mechtician

Gargamel Jr.
Messages
183
Reaction score
1
Location
Surrey, BC, Canada
Not necessarily...and might be a backwards step. One cannot expect a performance increase by just haphazardly throwing on an expansion chamber from something other than it's designed intention.
I've done the math. There is nothing out there that will suit my needs.
For now, I will stick with my megaphones.
First of all, let me just say that I am overcome with buck rut lust when I look at that kart! I watched your parking lot test videos as well, they were so exciting I needed to change my pampers! Such is my passion for 2 strokes :bannana:

To that end, I have a proposal for you, Russ. Actually two proposals:
1) You ship me one of your engines, doesn't matter which one it is. I'll pay for shipping here, you pay return shipping. Once it's here, I will procure an expansion chamber that I think will work and adapt it to said engine. I will then ship it all back to you and you can test it, and you tell me if it's a step backwards or not.
2) You assist me in procuring an engine, and I will perform the baseline testing, expansion chamber installation/fabrication & final testing. Obviously this is cheaper & less risky for you, but you don't get to physically enjoy the results :wai:

I suspect I already know which one you will choose, assuming you don't refuse entirely and call me a filthy slack-jawed degenerate (or worse). I realize my proposal involves a lot of trust and that trust is traditionally earned, not given, but I figured I'd put it out there in case your curiosity got the better of you :surrender:
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
I would suggest cruising the neighborhood on junk pickup day. That's how I obtained at least 2 of my Lawn-Boys.
Recently I was given an MTD snowblower with a Tecumseh 5hp 2 cycle engine. All it needs is a float. There's plenty o' 2 cycles out there.
I can not send out any one of my engines...trust is not the issue.
However, I can sell one of my B&S 2 cycle engines if interested.
I am not looking for a profit, but I would (at the very least) like to break even.
 

The Mechtician

Gargamel Jr.
Messages
183
Reaction score
1
Location
Surrey, BC, Canada
Cool :D BTW, thanx for giving me Lawnboy 2 stroke malaria jungle fever! I've been scouring my local craigslist and ebay for duraforce units with no success, it's driving me crazy! In my travels I also found this, which has me even more revved up. My wallet hurts already...
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Cool :D BTW, thanx for giving me Lawnboy 2 stroke malaria jungle fever! I've been scouring my local craigslist and ebay for duraforce units with no success, it's driving me crazy!

Heh, heh! You and me both, mate! I got a new guy at work, says he's got a Lawn Boy, or maybe even two he might be willing to give up... I might be able to go see them on Monday. I'm trying not to get too worked up because the guy's new, and a talker (read: BS'er), so I don't even know if the offer's legit, yet. Furthermore, I don't yet know what models they might be, or how old... Either way, it's driving me insane because you just can't find the dang things around here, garbage day or not!
 

The Mechtician

Gargamel Jr.
Messages
183
Reaction score
1
Location
Surrey, BC, Canada
If I can't source anything locally Russ, I might just take you up on your offer :) Like toystory says, lawn boys seem to be hard to find north of the border. I'll start cruising around during junk days and put some want ads on craigslist and such, we'll see what happens. So much for instant gratification! All I can do is drool...
 
Status
Not open for further replies.
Top