suzuki rm125 chain size?

Status
Not open for further replies.

birdcotexas

New member
Messages
6
Reaction score
0
I am planning on swapping out a suzuki rm 125 motor for the 5hp robin subaru that is on my kart. I dont have the motor yet, a friend of mine is bringing it in a couple weeks when he cormes to visit. I am having trouble trying to figure out what sprocket and chain i will need for the rear axle and how i will mount it to the axle. Any help would be greatly appreciated.
 

birdcotexas

New member
Messages
6
Reaction score
0
I think basically what i need is a hub that will bolt to the dirtbike driven sprocket and then clamp onto the axle. I just dont know where to find one.
 

birdcotexas

New member
Messages
6
Reaction score
0
So I can just get a regurlar gokart sprocket in the 420 size and be fine. Any suggestions on gear ratio
 

birdcotexas

New member
Messages
6
Reaction score
0
I called a bike shop and they say its probably a 520 chain. I dont know what to think now. Im gonna have to wait till i get the motor and measure the drive gear.
 

mrfreyguy

Buggy Almost Done
Messages
388
Reaction score
1
Location
Iowa
I called a bike shop and they say its probably a 520 chain. I dont know what to think now. Im gonna have to wait till i get the motor and measure the drive gear.

Im pretty sure it should be 520. My 82 rm125 used 520 chain. What year is it?
 

birdcotexas

New member
Messages
6
Reaction score
0
Alright. That's good news. Any idea what kind of gear ratio I'm looking at? I want torque over speed all day long.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
id make it similar to the bikes gearing

the engine is geared in a certain way to shift at the right times... so you dont shift out of first and into second then immediately into third and so on....

EDIT: the bikes gearbox was engineered to get the best performance with the ratio it has so i wouldnt mess with it too much. of course a kart is a little different than a bike but still you want to not have too much or too little load on the engine. just right is hitting the powerband in all gears but especially 3rd up.

if that makes any sense then good.lol
 

birdcotexas

New member
Messages
6
Reaction score
0
That makes sense. The only problem is the gokart tires are much smaller than the dirtbike. But i dont want it to be nearly as fast as the bike with no suspension it would be dangerous. Im thinking i want a 40, 45 mph top end at the most.
 
Status
Not open for further replies.
Top