Starting a 500cc Tom Thumb mini trike build and need advise

[numscul]

I have a nice 82 Honda 497cm air cooled kick start engine that I want to build a tiny trike frame around and I don't want to pay $350 bucks for a new wire harness, so I was wondering if I could get away with using a wire harness off of a 125cc pit bike if I redid the connectors or am I asking to start another fire?

Anyone as cheap as I am and ever do this before ?

Any electrical advise would be great

 

[Master Hack]

If you have the original harness get a wiring diagram and modify/repair/customize/adapt it to suit your needs.
l’m working on one now.

 

[Whitetrashrocker]

Yup. DiY. This was a donor motor I wanted to get running before the swap. I didn't have much of a schematic but you get the point.

 

[numscul]

it's funny how something that looks like spaghetti can be so intimidating
I don't have the original wire harness but I do have a wire harness from a 125cc Chinese kick start engine So in theory all I would need to do is make sure I was able to connect it up and it should work

Thanks and good luck with your project

 

[Master Hack]

What kinda electric equipment are you going to have on this vehicle? Ya already said kick srart, so no starter, probably no generator? So what? Some lights? No ignition? Just a kill switch? This should be purdy simple. A wire harness from another machine won't work.