points and condenser huhhh?

Status
Not open for further replies.

Bluethunder3320

New member
Messages
5,677
Reaction score
39
okay so i have to put the points back in my HM80 because the ignition seems all messed up. and it has no spark when i accelerate, gas shoots out carb, spark returns, BOOM and shears key. and engine flings itself into the air.

i have a bunch of tecumseh ignition parts. i still have to take the coil out of the HM80 but i am going to put an H60 ignition coil and flywheel into the HM80 because i have no need for a lighting coil i want the ignition to be soley on the spark plug. simplified ;)

so im not quite sure what wire goes to what since i took these apart.

also on the H60 coil theres a fin splitting from the rest, this is not a problem i have heard?

anyways, heres what ive got, im just clueless how to get the points back in.... and what wire has to go to the points? what should the condensor be hooked up to?

a picture of a assembled coil with the cover off would be greatly appreciated!!

thanks everyone!! :D



 

sexyvicta

New member
Messages
806
Reaction score
2
both my tecumseh coils have same problem with the plates seperating. Both still have heaps of spark tho so meh.

there is a pic in my build thread of my magneto. Have a look at that. If you cant work it out i will see if i can scan up a page from the manual i have
 

sexyvicta

New member
Messages
806
Reaction score
2
next time you're stuck you could have a look at your local library for a manual. Mine has 3-4 manuals that cover verious tecumsehs and im on the other side of the world lol. Photocopied a few pages last weekend

i looked for a pic of a magneto in my stuff but dont seem to have one which shows how it goes together but i see Russel found it for ya anyway
 
Status
Not open for further replies.
Top