Only works for two-foot drivers :-)

Status
Not open for further replies.

brycem

New member
Messages
2
Reaction score
0
Manco Interceptor go-kart - 126cc Robins OHV 4 cycle engine, with relatively fresh clutch and brake.

My youngest learned to drive it yesterday and was two-footing it (applying brake and gas at the same time) a bit as she was learning... anyway, she pulled up to me and stopped, but then stepped and the gas and nothing happened. Didn't hear any bad sounds, just didn't go anywhere. Pulled off the cover today and took a look. Here's what I saw: https://onedrive.live.com/redir?res...007&authkey=!AHdiZyX7-mrI7MA&ithint=video,mp4

any suggestions? here's the parts diagram:

http://www.amsportworks.com/pdfs/go...-104/104_operatorsmanual_released20020909.pdf
 

brycem

New member
Messages
2
Reaction score
0
Seems like the centrifugal clutch is still engaging and turning the sprockets and chains when gas is applied... Is it something wrong with the sprocket\drum assembly maybe?
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
Seems like the centrifugal clutch is still engaging and turning the sprockets and chains when gas is applied... Is it something wrong with the sprocket\drum assembly maybe?

He already stated that she was riding the brake while standing on the gas.

Original Poster, please use the forum format for uploading photos and video links. Many of us don't have unlimited bandwidth and data plan's, and third party site's are way to costly for us to look at.

Short and sweet; if you could load it up there, you can load it up here. End of story.
 
Status
Not open for further replies.
Top