Motor Cuts out

Status
Not open for further replies.

the_baran

New member
Messages
2
Reaction score
0
I bought a used Go Kart and refurbished it nicely for my daughter. When she was able to ride it again, the engine would frequently cut out mostly upon acceleration or deceleration. And I got tired of running down the street to pull it started again for her. It is a briggs and stratton 5HP. So I had the engine serviced and the carb rebuilt. Now that I put the engine back on the Kart, same thing. Now this kart appears to be home made and actually reached speed of 45mph with me on it before I had the engine serviced. The chain is on the clutch and attached to the sprocket weilded to the rear axel. Not sure what the issue is, but am inclined to think it is not the motor or tuning thereof as the guy who rebuild the carb is quite reputable. The engine starts with one pull and will idle all day.

Any ideas? Thanks.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Sounds like a lean fuel/air mix.
I would recommend you contact your "reputable" guy and demonstrate the problem to him.
I've been servicing small engines for several decades and on rare occasions something (inevitably) gets past me.
Sometimes, real time conditions can exceed what appears to be a good rebuild on the bench.
 

the_baran

New member
Messages
2
Reaction score
0
grounding out when accelerator return spring touches a clip on the motor that has a wire coming from it.

Thanks to all for you responses.
 

B.M.800

TheBeal.
Messages
2,387
Reaction score
26
Location
Central PA
Dont ya love when it something simple... mad at it for being so simple, but relieved it wasnt something more serious...
 
Status
Not open for further replies.
Top