Increased timing

Status
Not open for further replies.

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I have asked a few questions about timing and no one really replys, but they were pretty long and complex questions. So heres the breakdown. The flywheel i plan on buying has a built in 30 BTDC ignition timing. Is this too much for a briggs 5hp?
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
I'm pretty sure that's aimed at a methanol-burning race engine, which (iirc) would be a bit much for gasoline.

Then again, I've had a terrible time trying to google stock flathead ignition specs just now...
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I found this on the raptor. It is 22 and the raptor is around the same size so would it be simillar? What do you mean by retard timing r chez?

Heres the flywheel: http://ombwarehouse.com/ARC-Billet-Flywheel-Briggs-5HP.html



The factory-specified optimal ignition timing for the Raptor engine is 22 degrees before top of dead center (BTDC). The Animal, 206 and World Formula engines are factory-designed for an ignition timing of 29 degrees BTDC.
 

Badot

New member
Messages
677
Reaction score
3
ARC racing sells the same flywheel with adjustable timing advance for $175 IIRC.
 
Status
Not open for further replies.
Top