If the deal goes through...

Status
Not open for further replies.

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
... Then im going to get an 8hp Honda engine, a 5hp honda engine, a Tecumseh 7,8,or9hp engine (he doesnt know what it is but he says its big :) ) a 7hp subaru robin engine, and a 5hp briggs. All that as a trade for my non running honda magna motorcycle(i got for free)

Wadda ya think? :roflol:

Thanks,
Josh
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
hey guys so today he came by and dropped off some of the stuff. i got the 5hp honda gc160, its missing the spark plug and the exhaust. the 8hp honda gx240(i think) it needs the recoil. and the 5 horse briggs. im actually starting to think its a tecumseh not a briggs, ill post a pic later of the stuff so you can see, it needs a pullcord.

he told me he would come back monday with the snowblower(runs perfect, tecumseh) and the subaru, thats missing the intake and the carb.
only1of his things run so far....
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
Here are the pics of the first part...

Im kinda mad though... the 8horse has this weird reduction thingy so idk if i can take that off to use it on my minibike or not... and the 5hp honda was on a generator so it has this like female splined shaft thing on the end that kinda looks like a socket. lol. Ill take some pics of that when irene gets out of the way. For now heres what i got...





 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
how do i take the rivets off the pullstart?

Drill or grind them off.

Do you know what kind of spark plug it needs?

Search the model numbers on the tecumseh website, you should be able to find it out.


Get a new fuel line for the tecumseh. looks dry and cracked. If it started leaking on the coil and engine while running it could be bad...
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
the 8hp has a standard 1 inch keyed straight shaft. it just has what looks to be a gear reduction unit on it.

Do you know if the carb on the GC160 engine is the same as the GX160 carb? I may just throw that carb on and get my clone running thats on my minibike now. And then later on use the 8 horse for a new project :) maybe an 8hp offroad kart with a tc. Now thatd be nice for a senior project. Ill get the engine running and save it.

Im also waiting on a nice tecumseh engine thats on a snowblower. If it has a 3/4 shaft ill use that on my minibike instead and throw the clone in my bros kart. So will the GC and the GX carbs swap out fine?
 

the-cyborg

New member
Messages
476
Reaction score
6
Location
Spring, Texas
the 8hp has a standard 1 inch keyed straight shaft. it just has what looks to be a gear reduction unit on it.

Do you know if the carb on the GC160 engine is the same as the GX160 carb? I may just throw that carb on and get my clone running thats on my minibike now. And then later on use the 8 horse for a new project :) maybe an 8hp offroad kart with a tc. Now thatd be nice for a senior project. Ill get the engine running and save it.

Im also waiting on a nice tecumseh engine thats on a snowblower. If it has a 3/4 shaft ill use that on my minibike instead and throw the clone in my bros kart. So will the GC and the GX carbs swap out fine?

It should be the same. if not it's so close it will be scarey.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
YAY!! when The "Hurricane" Gets over with ill check if they fit and try to get the clone running.

Hey cyborg would you be interested in that 7hp subaru engine? Maybe a trade for your 1inch bore clutch?
 
Status
Not open for further replies.
Top