Hot roding engines ?

Status
Not open for further replies.

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I have been looking around on the forum and i don't see a thread just on Hotroding an engine. I wanted to start a thread on Everyone just putting there 2 cents in about adding HORSEPOWER AND RPM. Partly because i want to try to double the power of a 5 horse Briggs and Stratton and it can be helpful for a lot of people looking to add that extra UMPH.
 

Jcotz

...wasn't there
Messages
374
Reaction score
1
Location
NY
Well, define "hotrodding", do you mean modifying without buying new parts, or buying upgrade/better quality parts to get more power? If you are looking to add rpm, you could remove the governor, but be careful with that. Also, if you want to get new parts, then you could start by maybe, getting an air filter, upgraded exhaust, re-jet of carb, etc...
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
Anything really, costly things, tuning, removing parts, etc just anything people to increase the engines performance.
 

Jcotz

...wasn't there
Messages
374
Reaction score
1
Location
NY
Oh, I can't really help that much. I don't have as much knowledge as some members here, I just have a solid understanding of the engine, parts and tuning.
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
i have seen plenty on the forum, don't get me wrong i just want to start a long thread on that info only, I know of a few ways like adding a straight pipe on 4 strokes, removing Governor but i would only do it if i have the correct parts to stop it from failing, Adding a bigger main jet, boring the cylinder and adding a larger piston, shaving eye brows, performance air filters. few others i cant think of
 

slideways

New member
Messages
575
Reaction score
6
Pretty sure that "my lil 5hp guide" stickied on this page is exactly what you are after.
 
Status
Not open for further replies.
Top