Hello, and help ID this kart?

Status
Not open for further replies.

junkerkart

New member
Messages
7
Reaction score
0
Hello, new go kart to us from craiglist. Rain flooded engine, nothing works, loose, broken or flat. Fixed most of it, runs fine and fun. No idea what model maker this is? Manco? unknown year, floor decal is totally gone. help! Thanks, great forum and info.
 

Attachments

  • IMG_4233.jpg
    IMG_4233.jpg
    109.6 KB · Views: 3
  • IMG_4230.jpg
    IMG_4230.jpg
    92.7 KB · Views: 5

junkerkart

New member
Messages
7
Reaction score
0
From CA, predator 212, clutch seems very noisy (almost like a rod knock, or is) but we got it running after going through carb, changing the oil, and finally rocking the crank back and forth to free the rust-locked piston. Working on home made chain guard for it now.
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
248
Location
Ruhrpott [Germany]
either a 403 , 405(some later version) or a 407

https://americanlandmaster.com/pdfs/gokarts-minibikes/model-403/403_operatorsmanual_40311.pdf

https://americanlandmaster.com/pdfs/gokarts-minibikes/model-405/405_operatorsmanual_4051640519.pdf

https://americanlandmaster.com/pdfs/gokarts-minibikes/model-407/407_operatorsmanual.pdf

as you can see pretty much all identical ...

you're missing the rear bar though (part number 9554)
which is needed for tability purposes, that's why some 405's had that as a one piece
(which was just inconvenient to mount the engine...)

'sid
 

junkerkart

New member
Messages
7
Reaction score
0
GOLD! yes, I could see something was missing from the rear, couldn't tell what it was. Thanks agaon.
 

junkerkart

New member
Messages
7
Reaction score
0
finally got the homemade chain guard on, gotta keep the kids safe and from flinging junk everywhere. Keeping costs down, fun factor up!
 

Attachments

  • IMG_4236.jpg
    IMG_4236.jpg
    79.8 KB · Views: 0
  • IMG_4234.jpg
    IMG_4234.jpg
    89.5 KB · Views: 0
Status
Not open for further replies.
Top