GY6 info for Buggy build

Status
Not open for further replies.

Chris82

Newb
Messages
8
Reaction score
0
Hey guys. I am building a single seater buggy and the rear is designed for a GY6 motor. Not sure what brand the buggy is. I have a brand new Predator 301cc from HF that i got prior to purchasing this chassis. Question is, is it worth it to put a GY6 on it instead of the Predator(I am thinking it is)? If so, which manufacturers should i stay away from? Craigslist kind of sucks here for this kind of stuff, so does anyone know of a good place to shop where they dont overprice? Thank you for your answers!
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
Do you know how to weld? Do you know that reverse wont work with the predator 301, so you will have to get a new reverse kit? Do you know how to assemble a jackshaft? Do you know how to gear the kart properly? Do you know you will likely need to get new sprockets to account for the internal gearing differences between the gy6 and predator? Do you know you will need to get a new transmission as well?

If not, I am assuming you are looking for the cheapest way to do it. So when you say 'worth it' do you mean worth it as in its better performing, easier to do, or cheaper? Because I would say no to easier, no to cheaper, and maybe on better performance (unless you were to get a 420cc predator, then it would for sure be better performing.

The cheapest place would be amazon/ebay for a gy6 engine. They are all chinese knockoffs so you cant really go really really wrong. Must make sure you get the right size (there are like 2 sizes i think, a short, and a long one)
 

Chris82

Newb
Messages
8
Reaction score
0
Worth it to me is $$ vs outcome. I am not willing to spend $2000 on a hopped up motor, but may be willing to spend $1000 if the outcome is indeed excellent. I am aware of all the necessary changes required, and I guess what I was getting at is, is the the predator THAT MICH of an upgrade, if an upgrade at all, that it would be worth it to go through all the pain of changing everything?

If I am reading you correctly, it would seem that it is not worth it to you. Am I reading you correctly? And thanks for your reply!
 

2SlickNick

American Minibikes @ FB
Messages
2,758
Reaction score
33
Location
Mesa, AZ.
Sticking with the gy6 set up would be the cheapest, most power, and all around better setup than the predator.
 

Chris82

Newb
Messages
8
Reaction score
0
Sticking with the gy6 set up would be the cheapest, most power, and all around better setup than the predator.

That's what I was thinking, but I have zero experience with them and wanted some advice. Thank you for replying!
 
Status
Not open for further replies.
Top