Clutch vibrations

Status
Not open for further replies.

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
A few days ago the bolt that holds my hillard clutch on the PTO flew out and my clutch housing flew off as well. I put it back together and it all went together no problem. But a few days later i went for a ride, at a certain rpm the back engine side had a terible vibration that sounded like somthing was sliping. But by the time i hit that rpm my clutch was surely engaged. After that i pulled my clutch off and the Housing wasent bent. Bad bushing or what?
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
Motor Oil, Chain Lube, Gear Oil.... I use LiquidWrench Chain lube because it gets thick and stays on longer and I've had my clutch on for about a year now and haven't had to replace the bushing yet and I put it through a lot of hell.
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
I oil mine every time I start it up for a day of use. So if you wanna ride it for a day, oil it up at the beginning of the day and let it go.
 
Status
Not open for further replies.
Top