Clutch spring

Status
Not open for further replies.

Coralcor

New member
Messages
7
Reaction score
0
Location
shirley ma
Ok I have a comet clutch. Its a 20 or 30 im leaning twards the 20. But my spring broke and I cant figure out how to wrap a new one on. does any one have any pics or info.

Also does any one no how long the spring is? Im at work and forgot it at the house. And spring stiffnes:auto:s any one no?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Welcome to the forum. Are you refeering to a centrifugal clutch, or a CVT drive? Your spring descriptions sound like a centrifugal clutch, yet Comet 20 and 30 are CVTs. I'm lost.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
If a CTV, the 20 series has a symmetrical belt like a "V" and the 30 series has an asymmetrical belt like this
\| <this side is almost vertical.
 

Coralcor

New member
Messages
7
Reaction score
0
Location
shirley ma
i should have been more specific. sorry i dont no all to much about this stuff. i no buells and fords lol. its the part in the link below. here on the centrifugal drive clutch on the torque converter. but i bought the cart for cheap cash... 50$ and i don't want to put any money in to this motor or any of the other parts really because the motor is basically junk.the guy who had it before me beat the piss out of it. and im going to run it until it blows up then i have an 8 horse off a snow blower that im going to put on so im going to need a new clutch.

so in any case im trying to put as little $ in to this as i can. and 5$ worth of springs is cheaper. but i cant figure out for the life of me how this spring gets wrapped up on there. does it hook on to the rods there or does it hook up to it self?


http://www.mfgsupply.com/gomini/gom...30/gominiclutchtorqtav30parts/200344a-w1.html
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Ahh- that's clearer.

I don't know for certain, but looking at the pic, it looks like TWO springs- each one is wrapped around and simply hooked to itself.
 

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
its just the 2 springs rapped around and hooked to themselfs, even tho they look like some ordinary springs, theyre extremley strong and trying to pull the back apart by yourself is a challange on how tough the springs are. I beleive you should just buy a new weight pack, get someone real strong to pull apart and put on, and your good to go
 

Coralcor

New member
Messages
7
Reaction score
0
Location
shirley ma
thanks guys i appreciate the help. im going to try to put some springs on it..i already bought some lol. if it dosent work to well ill just buy the new one..

yea i got the cart mostly for the frame. its solid and i fit in it kinda lol im 6'1" i dont fit in to many karts well. but the torque converter is deff a plus. i might try to get it to work with the 8 horse
 

Coralcor

New member
Messages
7
Reaction score
0
Location
shirley ma
Ok well she runs but now new problems show up. I have a bent sprocket and a broken chain. But she goes pretty fast was fun ast least 25 dosent like hills tho lol
 

augidog

New member
Messages
329
Reaction score
0
not difficult, just don't get too excited is all...hook the ends together, then "roll" the loop down over the weights & into the groove...anyone who practices "safe wrenching" should be familiar with this move ;)

to repeat...be warned, this isn't just any spring, its strength determines the RPMs necessary for engagement.

buy/install 'em in pairs for best results, imo.
 

Coralcor

New member
Messages
7
Reaction score
0
Location
shirley ma
Sweet! Your 8hp should be flying up hills, what gearing have you got and what size tyres?

its a 6.5 horse right now. i have no clue about the gearing. its a comet 20. i dont think that helps. i wanna say there probly like 12" tires there scorpions. thats about all i no lol we just put a new chain on it. and had it going again. still needs some work but done for today.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
What you want to do is count the number of teeth on the torque converte and the number of teeth on the axle sprocket. Then get a ruler and measure the rear tyres to the nearest 1/2".
 
Status
Not open for further replies.
Top