clone with lights no charge coil

Status
Not open for further replies.

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
if possible i would try to find out how much power that mag is putting out, then try and see what the spark plug needs, then see if/how much you got left over, like blue said, mags are usually high volt, so some type of inverter/converter would prob be needed. also this may seam stupid, but do these things give out ac current, or dc, or ac that is then converted to dc?

p.s. i wan't that green bike!!!!!

DC, and yes it is very high voltage. Ever held onto a plug wire when an engine is cranked over?
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
DC, and yes it is very high voltage. Ever held onto a plug wire when an engine is cranked over?

Yes, quite a steep learning curve although it's the BEST way to check for spark. You don't need to SEE a spark or make sure it's close enough to jump or that the motor case isn't somehow insulated.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Woah, yeah! Was adjusting the timing on mom's Accord way back when. It was raining to beat the band, and with the engine running I grabbed the distributor........................

I swear I saw god!:ack2:
 
Status
Not open for further replies.
Top