Burg build

Donthaveaclue

New member
Messages
7
Reaction score
0
Hi all
Can any 1 help me out
So my lads got a burg peddle go kart I'm wanting to convert it to powered.
Iv just picked up a 48v,1800w brushless motor and controller.

So what's the simplest way of getting it all put together
I'm thinking
1,on of switch
2,3way switch for speed setting
3,4 12v lead acid battery
I need to work out motor sprocket and drive sprocket a break system with e break
If any can help at all I'd really appreciate it
Cheers
 

redflash

Well-known member
Messages
650
Reaction score
619
The frame is too thin, and on top of that it's not welded. It really won't hold together.....and electric motors are a pain in the a$$ and have virtually no power. I've done it ! some of the tesla guys may have suggestions,,,,,,stay tuned.

Da Redflash
 
Top