Bocart Clutch

[pauls]

Hi,

I have an old Bocart Rabbit Go Cart but the clutch has totally gone so im looking for a replacement but cant seem to locate one.

Its a five and half horsepower Briggs and Stratton engine and the person who is working on it for me has said the clutch has ten teeth and a 22 mm shaft.

Can anyone point me in the right direction ?

Thanks

 

[KartFab]

you are probably going to need to get a standard 3/4" shaft clutch (19.05mm). Ive never heard of a briggs and stratton engine with a metric shaft...

Probably something like this one. http://www.gopowersports.com/10t-3-4-bore-centrifugal-clutch-41-420-on-sale/

 

[itsid]

that indeed sounds odd..

I know the wetclutch for Hondas came with a 22mm shaft (roughly 7/8" )
And I know B&S makes vertical shaft engines with that shaft size (even in the 5.5hp class)

but a horizontal shaft engine??

You sure you're not running a wet clutch?
and if you do... then keep it (new plates, rarely ever a new chain and/or sprockets)
and it'll outlast any other clutch on the market.

expensive to replace (and reasonably cheap to maintain!)

Could you share a pic, for us to be sure what we are dealing with?

'sid

[EDIT]
Ohhh look a 2007 bocart Rabbit drive train..
that silvery case between the black chain guard and the engine is aforementioned wet clutch!

You do not need a new one (certainly not!) you need spares to freshen up the one you have at worst )

*ha.. almost knew it*