Any experience on Predator 301cc mods?

Status
Not open for further replies.

Brett066

Member
Messages
37
Reaction score
1
Location
Bunker Hill, Missouri
Hi guys! Picked up a Predator 301cc (8hp) this weekend. Wasnt really looking, but it was a good deal. $160 and it only has about 5 hours on it, and still under warranty til next April. Anyways, Ive been looking around on the internet some and ive seen that 270 parts work, and seen some say 390 parts work......anyone know from experience yet? I know a 390 carb and stock cam was said to be a decent upgrade for a 270. Would that go for this too possibly? Thanks in advance guys👍
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Look for GX 340/390 parts
"Axx3d
01-31-2015, 11:04 AM
I contacted support at omb warehouse.. Just got an email back and anything that fits the GX 340/390 will bolt up.

There is so little performance parts for the 301cc pred it is insane. There is everything for the 212cc..

Well problem solved.
Axx3d
02-07-2015, 01:50 PM
Ok.. filter adapter and filter fit. I modified a crankcase breather filter from O'Reily's to replace the old setup... Running great..

for anyone else's future ref for the 301cc predator motor who wants to get rid of the stock air box and foam filter.

Filter adapter (http://www.ombwarehouse.com/GX340-390-Air-Filter-Adapter.html)

Angled Filter (http://www.ombwarehouse.com/Air-filter-Angled.html)

They suggest to use the choke lever setup but it is not needed for this setup."

---------- Post added at 08:04 PM ---------- Previous post was at 08:03 PM ----------

http://www.diygokarts.com/vb/archive/index.php/t-28380.html

The above link might help

---------- Post added at 08:20 PM ---------- Previous post was at 08:04 PM ----------

Exhaust
http://www.gxparts.com/p-4574-exhaust-pipe-honda-engines-gx240-gx270-gx340-gx390.aspx

---------- Post added at 08:38 PM ---------- Previous post was at 08:20 PM ----------

I assume you are removing gov. I'd check to see if you need a 270 or 340 connecting rod if you also change valve springs (assuming you change the cam). I assume one of those will work
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Sorry I haven't tried any of it personally, but it looks like a the 390 carb, 340/390 air filter adapter have been used on the 301cc.

Best bet might be to call the nice folks at ARC Racing or GoPowerSports
 

Jrgunn5150

Rudderless
Messages
1,028
Reaction score
12
I just want to follow along. I almost bought one, but didn't because it seemed to have all the difficulty of mounting a 420 for me, but none of the aftermarket lol.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I was torn between Lifan / Predator 420 and Predator 212. Ended up going with the 212 because of the availability of performance parts. Probably could have gotten the 670 for what I paid to upgrade the 212, but happy I went this route. I learned a bunch.

Plus you can get over 20HP out of the 212 on alky fuel (I've read).
 

minibikegi

Banned
Messages
31
Reaction score
0
NR racing, Be a place to look. in Michigan

---------- Post added at 11:02 PM ---------- Previous post was at 10:56 PM ----------

NR racing, Be a place to look. in Michigan

They have helpful foot note on there parts, what fits what etc. ive bought there and good shipping time etc.
 

Brett066

Member
Messages
37
Reaction score
1
Location
Bunker Hill, Missouri
Thanks a million guys. Itll be a minute before I start on any internal mods. But the carb and air filter will be one of the first ones. I hate the stock filters on the predators. I started oiling the stock foam piece, but still find crud in the bottom of the airbox all the time. Im gonna keep reading up on it.....maybe get to the point where im doing the trial and air thing. Lol. Ill keep you guys posted!
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Thanks a million guys. Itll be a minute before I start on any internal mods. But the carb and air filter will be one of the first ones. I hate the stock filters on the predators. I started oiling the stock foam piece, but still find crud in the bottom of the airbox all the time. Im gonna keep reading up on it.....maybe get to the point where im doing the trial and air thing. Lol. Ill keep you guys posted!

"Trial and Air" lol
This guy!
 
Status
Not open for further replies.
Top