Aligning comet #30 issues

Status
Not open for further replies.

Mr. Spindle

Senior Member
Messages
532
Reaction score
8
Location
middle tn
I'm trying to align my driver unit with my driven, I have a spindle spacer(obviously) that is spacing the driven so it doesn't hit the oil dipstick, but this makes the belt veer sharply to the left because the driver is not aligned with the driven. Help!!!


PS: sorry, my iPad won't let me post pics but I'll try;)
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
I am not kidding...
Lots of guys have this issue with the Dipstick.
Psdators have 2, 1 front and 1 back. I think one has a dip stick and the other is a cap.
Make sure the Dipstick one is on the Front and put the cap on the rear where it hits,
Then with it on and tight Cut, grind whatever the Top handle part off, till it clears the TC backing plate. I have even seen where guys have to grind a teeny tiny bit of the TC backing plate.
 

Mr. Spindle

Senior Member
Messages
532
Reaction score
8
Location
middle tn
I am not kidding...
Lots of guys have this issue with the Dipstick.
Psdators have 2, 1 front and 1 back. I think one has a dip stick and the other is a cap.
Make sure the Dipstick one is on the Front and put the cap on the rear where it hits,
Then with it on and tight Cut, grind whatever the Top handle part off, till it clears the TC backing plate. I have even seen where guys have to grind a teeny tiny bit of the TC backing plate.

Dipsticks not really the problemo anymore ;)
 
Status
Not open for further replies.
Top