Search results

After tedious hours with the multimeter, the coil and plug wire are good, the stator and pickup coil are good, all within tolerance. It is throwing volts to the cdi, but the cdi isn’t sending the volts to the ignition coil. I triple checked all grounds, all connectors are good and have no broken...

I have disconnected the kill switch wire going directly into the cdi and then jumped a secondary ground from the ground going to the cdi to the frame. Still nothing spark related…

It is the AC one.

I just tested the ac coming from the stator and exciter coil, confirming that they are both good and are in tolerance. I checked the pickup coil volts going to the cdi, it is good. Nothing. And I mean NOTHING is coming out of the cdi to the ignition coil. Do you think it’s a kill switch or...

Engine turns over perfect, it’s got the GY6 169cc stamped on it… are you talking about the ignition switch on the dash? Because I just replaced that with the factory one. And as far as fuses, there’s just the one glass fuse that goes to the ignition. Didn’t see any in line fuses. I’m just...

I have a DongFang DF200GKA, and I cannot get spark for the life of me. I am pretty mechanically inclined but I have tried everything and am at the point of just ripping the entire harness out and ordering a new one. I have replaced the stator with the pickup coil also, new cdi (same part #) new...