Search results

It’s off topic, but I wish I knew which shocks those where and how they feel/spring load. The standard ones on the Manco’s are garbage. But those look like a progressive setup with a good amount of travel.

Do the pins inside a Comet 30 wear down and cause slipping over time? I have an original Comet 30 driver. You can clearly hear metal screeching when you are using the Kart with a heavier rider, more load, or quick acceleration. It sounds like a metal screeching sound every couple seconds. As if...

Yes Itsid, you are correct. It is the original 9T on the jack stand (not 8). I mistyped. The tread on the tears is practically brand new. Although the cracks in the tires definitely tells me the tires are 5+ years old. It appeared to have the original comet belt 203589 when I picked it up that...

Wow. Disgraceful. The belt is backwards. I was so frustrated with trying to preload the clutch that I forgot about the belt. I saw two videos, one said rotate 180 degrees for preload and the other said a quarter turn. The 180 degrees was definitely not working. The spring would be wound to tight...

I thought I would add a 7” driven to the Kart for increased torque because of the big 22” tires and heavy frame. It works great however I am limited to about 3,000 rpm because the belt will climb above the small primary clutch. I should have thought about this considering an ATV clutch uses the...

Has anyone found a suitable replacement for the old Manco Intruder belt covers. These seem to be extremely hard to find and I’m not sure if the new style covers would fit the old style mounting holes. Thanks

A stage 1 212 with a TAV 30 clutch should be fine for what your trying to do. I just picked up a Manco Intruder II which is similar weight and design. My cart has a 60T axle sprocket, 9T on the jack stand, and a TAV 30 clutch. It ran ok, but the 22” x11” tires the owner out on out a little...