Search results

Ok for anyone else out there my original question still remains. Can anyone who has one of these please measure the voltage that comes off of the sensor(blue/white wire) and tell me what the functional voltage should be. And now I am curious as to what the gap between the flywheel and that...

It is not as you can see by this ebay listing https://www.ebay.com/itm/Ignition-Pulse-Generator-Pickup-Coil-Trigger-CDI-GY6-50cc-80cc-100cc-125cc-150cc/311460470173?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 This is also not true as I have stated I have 3 wires not two comming...

https://www.youtube.com/watch?v=verv8XacocQ

KartTekK: That manual is not for my kart. https://americanlandmaster.com/pdfs/LUTV/150cc-service-manual-14589R4.pdf is a closer version. In this image, you will see that the highlighted area is the black sensor which is outside of the flywheel. That part has already been replaced. The wires...

Well, today was very warm out so I made some time to take apart the flywheel. Pictures attached to the bottom. To KartTekK: There is no magnito underneath the flywheel only the coil wires. The flywheel itself is magnetic and the sensor which shows the CDI the location of where the piston is is...

Thanks guys, Its still very cold around here, but later this week we should get highs in the double digits so I will try and shovel it out and work on it this Wednesday or Thursday. I am going to start with Awdornowheels's suggestion first and then check out to see if I can pull the flywheel...

Karttekk, Both the switch by the ignition(by the start switch on the steering wheel) and the switch back on the motor have been bypassed. The magnetic pickup is the same thing as the magnito, just moved to a different location. The red circle shows where mine is and the highlighted part is...

Hello, all you smart people. I have an issue or two with my buggy and I have seen a few other posts about the Helix and spark issues. I will try and answer most questions before they are asked to minimize time. The kill switch by the ignition is already bypassed The CDI(DC) has been replaced...

Looking for more photos This is the frame without the peddles or the accelerator. I would do a current photo but I am currently repainting it. Ill grab more later.

Long way away from any good kart store but loads of places to run, I am from a farm in ND. I have 3 going on 4 karts and most of them are custom frames that I welded myself. I have one Kart with a Tecumseh 6.5 with roll cage. One flat cart that I welded myself with a Honda clone 6.5 with a...