Search results

thebscrew-in plug behind the right cylinder is probably the neutral indicator switch. I may have the book for this thing. I'll look.

And finally,carbs. Probably mikuni 26mm. The 305 carb may be a 26,but I'm pretty sure it used one carb. The 400 had 2 with a shared choke shaft.

The electrical box shouldbbe a regulator,he wires coming out of the left engine cover(alternator) should be same colors. I see cut wires. Ignition is right side,2 wires coming out of the small round cover? They. Go to the coils. This engine should have points,not electronic. Later '440's had...

There are 2 half shells like a cars main bearing that go around th pipe,then the ring slips over the pipe from the other end and 2 bolts secure it. I had a 75 with a 2 into 1 header. And k&n's

differential on trike I'll use a cent. Clutch,driving a jackshaft.

differential on trike these are clear shots.maybe this'll help. the front end is from a 16" bmx bike with suspension,extended about a foot and a half.

Aren't 2-strokes run with the shaft to the right?

differential on trike Shot,not shoy. ****ed touch screen!

differential on trike-photos ok,one shoy is without the bearing blocks. the dark one(hope you can see it) is with axle installed.

differential on trike I'll give it another shot.

differential on trike It's a tablet...android.

differential on trike have pics,but when I get to "choose file", it won't. Aauugh!!

Have pic,but can't select it. Whiskey tango forkbrace?

26" wide no room for two brakes. Diff has no drum or band brake. Being a trike,the frame is narrow. The caliper WILL stop the trike acting on the sprocket. The greasy issue I can deal with,done it on real choppers,its called a "sprotor". I'll find pics and post.

I was given a 3/4" differential axle. Opened it up,cleaned /greased/painted it. I bought pillow block bearings ,and welded angle-iron mounting pads. I don't have room for twin brakes,so It seems a caliper on the sprocket would be the cleanest/simplest way out. The differential is...

This project is not only useless,its stupid. But somebody had to do it,lmmfao!! Thanks!

mc master sells a one-way bearing for 1" shaft for about $38 each. so if you need2,plus axles,brakes,etc,i'm thinking buying the ready made differential is a better deal.

does the tecumseh 2-shaft have more spacing between shaft centers? that could be a way out for me.

it is a trike chopper. i have 20 yrs experience painting motorcycles,somewhat less fabricating parts,so it's a no brainer than my lil one has to have something special. thanks for the support,guys! right now i'm finding a 5 hp briggs barely fits...if a different carb can be used,a side flow...

regarding tube bending; i made a sissybar for my chopper out of 1/2" hardware store mild steel tubing. i hade it when it crimps on the inside of a bend,and tried a trick passed on to me by someone with years of experience. fill the tube with clean sand 9i used black beauty blasting grit that was...