Search results

I tried to see if they had a rebuild kit for the series 30 converter but couldn’t find anything. The driven is pitted and rusty so i was just thinking of getting a new one. I have about two dozen cans of spray paint in the garage itll be painted soon. New tires will probably be next week...

No plan to walk away yet haha ill look into preloading the spring i need to get another driven setup the one i have is rusted and just a new spring and cam bumpers is $25 so ill get a new one for $30

Take a string run it along the left frame go two feet past each corner front and back. Take a string on the back run it out till it goes over the string you pulled on the left side try and keep it as straight to the center of the back bar as you can. Now you made a right angle for reference you...

Ordered a 5959 offline im having an issue where the driven pulley is getting stuck between cam bumpers im not sure if it’s because the belt is stretched and worn or what i flipped the cam bumpers to where the un worn ones where the ones making contact on broke off ill have to pick it out but...

Ive got about $200 in the cart on GPS and am wondering if i should just go find a newer kart haha new spindles brake disk and caliper belt coverter plastic button things i have no idea what they are for.

Got a new to me scorpion and the brake cable was zip tied up all the components where missing does anyone know of a kit either band and drum or disk and caliper i can use on this kart? Not wanting to re fabricate the thing if possible

Thats the plan for tomorrow going to clean them up i pulled the belt off tonight thats how i found out the TC was stuck in the top end i am going to take it apart and try to clean it and smooth them out. Does anyone know a part number i can get a 5959 belt from a local parts house...

Yea gps has a disk setup for about $50 that didnt seem bad to me. My only thing is the axle is a hex. Figured out the converter was stuck in top end guess thats why i had to help it start with rolling the back tire. The belt is worn pretty good too try to find one local tomorrow. Carb is...

Anyone have info on a brake for this the only brake parts i have for it are a pedal and cable..

Thanks ive called the local auto parts store they couldn’t cross or at least figure out how to the 5959 belt. So ill order one online. Tires will be coming shortly the ones on it are do old they feel like plastic. The kart vibrates real bad too the plywood seat doesn’t help.

Thats shy they weren’t working... I ran out both steering linkages and ran them back in the same number of times both sides to where they had a slight toe in now itll almost do doughnuts where before it took the whole culdesac. There is a lot of slop in the hiem joints ill get new ones before...

Hey yall my brother in-law had a scorpion hiding in the trees under a bed of pine needles. I pulled it out and cleaned it up a little fuel tank was dry and clean i tried starting it with eather but it wouldnt so i poured gas in the tank and replaced the spark plug it fired up on the second pull...