Search results

Is that to find the nylon bushing? I know I can get nylon washers from the local hardware store and possible the bushings. Im just not sure if I need them.

I am redoing or fixing the existing steering components on my kids Carter Super Wheel Kart. After inspecting the spindles, they seemed loose on their respective brackets. I took them apart and was able to take some measurement along with assess what parts where there/missing. The axle its self...

In that pic it only has the one spindle bolt on the front.

Here is a pic of the original Carter Brothers Superwheel. What gets me is the parts breakdown and parts listing sheet states the rear rims are 6" with 14.4x700 tires and the front is a 5" with 4.10x3.50 tires but it doesnt look that way in the pics...

Hereis a few http://www.mfgsupply.com/gomini/gominibearings/az8206.html This one is a cheap one from BMIKarts they have quite a few https://www.bmikarts.com/mobile/High-Speed-Wheel-Bearing-58-x-1-38_p_1609.html

Well the only reason I need/want to replace the front wheels is because they are mismatched and one of them is cracked. The $2 bearings are from a few gokart stores online. Here are some pics of the front wheels. I really like the wheel in the top pic. Maybe I can find just one of the halves to...

Well I ended up finder some rear wheels and bought them online for $44 bucks shipped. I think the rear hub will be fine and I also found the 99502H bearings I need for the front wheels online for $1.80 each but going to hold off on those because I need new front wheels amd tires anyway. I will...

Well the right rear wheel is in pretty decent shape and will look good after media blasting, the left wheel that the sprocket and brake drum attaches to is another story. Its rusted pretty bad and has already cut the inner tube when its inflated. Not to mention the rim has been modified to fit...

Elbow grease i got. Im going to use the cabinet blaster on base to clean up the wheels but basically it has three different types of wheels on it, the front is mismatch as well and has one is cracked. But I think the rear spacer will be fine. I think the better bet will be to replace the rear...

Dang you guys are fast. I went out to take more measurements and pics and came back to a bunch of information. Thanks a bunch. At least I know who the kart was made by! Now I got to figure out what to do about the wheels and hubs. That spacer seems to be ok with the exception of a small missing...

Fabroman-No worries on asking about my skill level, I was an aircraft mech for the last 13.5yrs and currently a flight engineer on the CV-22 Osprey. But lets be honest I can always learn something and I am human so I will make mistakes. I am not sure we are talking about the same terminology but...

Do I not need a double hub? Or maybe I have it confused. It was a wheel, spacer, sprocket and brake drum. Maybe I am thinking the spacer is the double hub. Here are some pics. The wheel that has the sprocket attached had the center beat with a hammer to open up for the spacer!

This is my first post and I have been reading up on a lot of stickies and threads and I have learned alot. I figured I might ask for some help/advice. I just recently traded a Wii for a 2 seat kart with a Honda GX120 on it. I have already ordered a new max torque clutch as the old one was always...