Search results

My next change to this cart is to put a 72 or 80 tooth sprocket on it. I think that will give me the low end power that I want out of this cart.

I'll try to find a stronger spring. I also need to replace the bronze bushing. I'll try to locate the parts. Thanks

Is there a way to modify a comet clutch so that I can get increased engine RPM before the clutch locks up. Seems like the engine is lugging during take off. Honda gx 160 6:1 gear ratio 16.5 rear tires Single wheel drive. Thanks.

I took the clutch off and cleaned it up some and it is working well now. I am not sure what was wrong with it before but it is working fine now. I am going to stick with the #41 chain since the clutch works. I still plan on changing the sprocket to enhance the low end power and slow this...

Thanks to everyone for the advice. I now have a new set of questions that need answers. I think my cent. clutch has given up. After my children put it through a rather abusive session the other day it quit working, started making funny noises and little bits of metal dust were puffing out of...

I got my rims and tires for my kart. I ordered 7" rims with a 1" keyed hub. I cut the keyed hub out and drilled holes to bolt up to my hubs. The rims worked out well. Thanks again for the information. I attached a picture of the starting rim and the finished product.

I fixed up a kart for my rugrats recently. Put new tires all around, front has 6" rims with 14.5" tires behind are 7" rims with 16" tires. Engine is a Honda GX160, centrifugal clutch (torque converter) has 10 teeth and sprocket is 60 teeth, uses a #41 chain. The kart has a high top end speed...

Thanks. I think I will be able to make one of those rims work. That is a good website, I was able to find a few other things that I needed for my project. Thanks Again!

I am looking for some 7" diameter rims to fit a small go kart. The tires that I am looking at are 16-8.00 7. I have not been able to find any rims that will fit this cart on any online websites. If anyone can point me i a direction to purchase some rims that would work with these tires I...