Whitetrashrocker's latest activity

A very vague method would be find TDC of the piston on the compression stroke and see if the magnet is at the coil or just slightly...

Stay tuned. Full reveal comming soon.

As stated prior. I found a belt at the thrift store for a dollar. Worked at color matching the seat. Went from this... To this.

Well the timing has to be right. Did you mess with the flywheel or coil? You can squirt gas in the throat too. Anything flammable...

So as posted before, the front axle was crap. Had some half fast busings. Hey they tried. Sloposys So I looked online for...

Had the whole front end painted silver and didnt like it once i got it together. So as usual. Take it apart again. Painted the forks...

Spray some carb clean in the throat and pull it. Does it try to pop off then?

Pull em with your toofeses. Gotta grrr at em while you do it.

And an LED for the headlight. I found a par38 flood probably from an old tractor. Looked to fit like a proper headlight. Got...

Picked up an LED 1157 equivalent for the tail light. I got this kind just cause it had the out facing led board. Most 1157 replacements...

How about some info about what its doing? All we know is, it worked, you worked on it, now it doesn't work. Does it try to sputter...

No the black ones are just the HD ties. Your looking for these.

That is actually a Gen1 Carter Brothers mini monster truck. And yes I did a few modifications to replace the old 5hp Briggs with a 13hp...

J.Chad Do you have that 420 stuffed in that powerwheels truck?

Shorthand huh?