Recent content by timt

Rear hubs are on a homemade kart they have 6 bolts outside diameter is 3 1/2 inch and a vank rim was bolted to it. Pics of hub and rim any info appreciated.

Thanks Bluethunder and Fabroman for the quick replies. Gonna order up the header and muffler tomorrow and I'll just weld up a brace for them.

I have two Honda gx 140 engines on my kart and I want to install a performance exhaust on them. The problem is only gx 160/200 are listed does anybody know if they will bolt on. I've talked to the company's that are selling the parts but they don't no,any info would be appreciated. Thanks

That's funny because I was airing up the rear tires yesterday thinking the same thing. Hopefully I get the motors running today then I'm gonna put one last hard test drive on them before I tear it apart.

I got a ballpark figure to powder coat just the frame $150 probably just do the frame and paint the rest my self definitely would get pricey if had all the parts powder coated. Gonna have the frame sandblasted it has a ton of old paint on it plus I want to check all the welds.

I was also thinking home made. Gonna try to get it running today for a test ride to see what works and what doesn't before I tear it down. I'm thinking about powder coating the frame and some of the bolt on parts for durability or should I stick to conventional painting. Is there any drawbacks...

Hi everyone, just picked this kart up. I was told it's been sitting for decades that's the only history I have on it. Maybe commercial build or homemade the frame is one inch square tube has two separate axles each has it's own drum brake has two Honda gx140 engines with attached gear boxes both...

Hi everyone, I'm from south east Florida I just pick up an old custom made twin engine kart I not sure if it was a commercial build or homemade gonna try and post some pics and details in the go kart forum.