Recent content by Thrahl

  1. T

    Comet 40 Series Driven Completely Seized

    I don't know exactly. When I bought it the kart had been sitting in a few inches of water for a while out in the open. I would imagine it is probably 5 years old or so. I really don't know though.
  2. T

    Comet 40 Series Driven Completely Seized

    I took the little snap ring off then the cam came off with the spring. The sheaves are rusted to the shaft. If you go by this http://www.gopowersports.com/Comet/40series.pdf I took off 1,2,3, and 4. Everything else is stuck together.
  3. T

    Comet 40 Series Driven Completely Seized

    I actually just got the cam and spring off with a whole lot of elbow grease. The two faces are all that remain and they are very, very stuck. I am soaking it periodically in PB Blaster and attempting to hammer it out and it hasn't budged so far. I might have to pull out the torch before too...
  4. T

    Comet 40 Series Driven Completely Seized

    I just posted a thread yesterday about a problem with my drive clutch and got good responses that helped a lot. But now I realized I have another problem. My Comet 40 series driven clutch is totally locked up. It won't spread apart at all. I guess it has been like this since I got it, I just...
  5. T

    Multiple Problems with Torque Converter

    @toystory 4wd - I did a lot of researching last night and figured out what I am going to have to do. Adapting a 40 series on to a 3/4" shaft seems like a somewhat common problem with a fairly easy fix. Unfortunately yes I did throw the 10hp away. I built the go kart with my father years ago and...
  6. T

    Multiple Problems with Torque Converter

    Sorry it took so long to get back I have been busy. @redsox985 - I have been running it with the 5.5 ever since I got it. The 10hp it came with was nonfunctional (don't know what was wrong with it, was before I cared about this stuff). So I don't know what I'm missing :P @kendelrk - I thought...
  7. T

    Multiple Problems with Torque Converter

    I have a modified Manco Dingo that originally came with a 8 or 10hp engine and a Comet 40 series TC. The engine was trash so it now has a 5.5hp Honda GX200 clone. But the new engine has a 3/4 shaft rather than 1" so we went a got a 20 series drive clutch for it, but kept the 40 series driven...
Top