Recent content by that4wdwagon

  1. T

    Tecumseh Power Sport 6.0 issues..

    That actually wouldn't be a bad idea, the piston looked like it had a good bit of carbon build up when I cleaned the spark plug. How much do you use for a go kart? I've used it on plenty of cars but never on anything like a go kart. And I know!!! Thats the best part of using seafoam is the free...
  2. T

    Tecumseh Power Sport 6.0 issues..

    I'm located about 20 minutes from the Talladega Superspeedway in Alabama. Alright, I'll definitely try that tomorrow if cleaning the passages behind the welch plug didn't work. I also checked and reset the governor lever earlier just to rule it out(didn't change anything). I also might unhook...
  3. T

    Tecumseh Power Sport 6.0 issues..

    The only other thing I'm probably about to do it remove the welch plug and make sure everythings good there. Ive messed with tecumsehs before and have always got them to run really good, but this one just isn't wanting to run right... I would definitely get a new carb if it wasn't so close to...
  4. T

    Tecumseh Power Sport 6.0 issues..

    I've got a Manco go kart with the Tecumseh Powersport 6.0 hp that I'm trying to get running as a Christmas present. I've rebuilt the carb twice and played around with it for the past week and I still can't get it to run perfect. When use the primer bulb to prime the engine I do it about 5-8...
  5. T

    Replacing brake pads/caliper

    Well I had an idea right after I made this post and I got the old caliper piece completely off. I had to remove the axle, wasn't too bad, but now I'm having a problem getting the axle back on by myself...Plus its dark, so I'm gonna call a buddy over in a day or two and see if I can get it back...
  6. T

    Replacing brake pads/caliper

    Let me start out by saying I'm a noob when it comes to go karts, I've worked on cars my whole life but I'm clueless when it comes to karts. Any to the question, I'm fixing up a Manco 486 for my little brother for Christmas, I know I'm cutting it close. I bought the typical manuall brake caliper...
Top