Squiddy202's latest activity

Update: Firstly, I am going to not mount the spring with a zip tie forever. Same goes for the cotter pin. That was to test. My dad had...

Here's my suggestion...AGAIN... get a cable for a bicycle and use bicycle hardware...compatible parts do not have issues. Motorcycle...

Those the cable sheath can pull straight out of. This is doing the same thing. The black part stays on the cart, not the sheath. The...

So there is another issue other than the spring. Even if I use a bike cable or something this issue will still be here. I am going to...

That thing will kill somebody.

I have a swivel, I described poorly. It is like predators in that respect. I am looking at getting a good cable. For now I want to see...

Not the best as I still use mounted fuel tank, intake, and exhaust, but this is as good as I can probably get of the linkage. The lever...

Show me a better pic. Zoom out a bit.

How? It seems like the fastener is stuck at a specific point on the lever. Is that what the hole on the left/top of the pinch is for...

Lets get the basics. Un attach the cable from the carb. When you push the pedal all the way down, what stops it. Does the pedal...

Sorry, I will change that, but it is behind getting a good return spring, and brakes that work decently.

When you gonna add a FLOOR to your kart? The possibility exists that you may run over your own feet. SAFETY THIRD! 🚑 🤕

So I cannot find a good return spring, is there any way to not use that one I did, I must not have sent a good picture that shows that...

Those solid wire cables are NOT made for recreational vehicles. They have a wire wrapped sheath that is designed to HOLD the cable from...

By moving that cotter pin, you are giving that spring more room to move. Is that spring under tension when the pedal is at rest? Moving...