Sparkwizard's latest activity

With a little luck ya could hit 80 or 90, but dont buy into this golden years BS. 70’s aren’t for sissies, be prepared.

Some info: http://www.small-engines.com/5briggs You can *bypass the governor and connect a cable directly to the throttle using the...

Thatll work but isnt this DIY not BIY?

See post #10

https://www.partstree.com/models/130g32-0022-f1-briggs-stratton-horizontal-engine/armature-spark-plug-controls-electrical-system-governor...

Lol I should have said we need a pic of the top of the engine also. We can show you where to hook up the cable then. Should be a metal...

Generators use tapered shaft. To my knowledge, only generators and some chipper/shredders use tapered shaft. In the OP photo, I believe...

Even constant RPM engines have a governor. Governors use centrifugal weights to control the throtthe through a lever and a spring. Find...

Get some dry moly lube spray, take it back apart, clean ans lube the inside of the driver unit. Sometimes they just get gummed up and...

The driven pulley is the large one on the rear of the t/c . The belt should be at the top of pulley. Now that you have the driver...

Welcome. What is that big square thing welded on the back? Doesn't look like it belongs there. Great age for your son to start driving a...

Thanks. Hadn't thought of that.

Boat seats come in a variety of sizes and shapes. Some are nice and cheap, some are stupid expensive, but they are worth a look.

I put this one on mine. Its pretty comfortable and holds me in place when sliding the corners. Has the provisions for a harness if you...

That spring has a big loop on one end of it. That loop goes to the H shaped part on the governor arm and should pull down to open the...